High Power LED ferkearsljocht PCB en Electronic Components Stores
Produkt Details
Basismateriaal: FR-4, FR2.Taconic, Rogers
Koper dikte: 1/2 oz min;12 oz max
Board dikte: 0.2mm-6.00 mm (8mil-126mil)
Min.Gatgrutte: 0,1 mm (4 mil)
Min.Line Breedte: 0.075 mm (3 mil)
Min.Line Spacing: 0.1mm4mil)
Surface Finishing: Immersion Gold / Au, HASL, OSP, ensfh.
Warp & Twist: 0,7%
Hole Posysje: +/-0.075mm (3mil) CNC Drilling
Isolaasjeresistinsje: 10Kohm-20Mohm
Konduktiviteit: <50 ohm
Test Voltage: 10-300V
ANCE kontrôle: +/-10%
Ferskillende impeitence: +-/10%
Outline Tolerânsje: +/-0.125mm (5mil) CNC Routing +/-0.15mm (6mil) troch Punching
Gatdiameter(H) PTH L: +/-0,075 mm (3 mil) NON-PTH L: +/- 0,05 mm (2 mil)
Dirigent Breedte (W): +/-20% fan orizjinele keunstwurk PTH L: +/-0.
ús tsjinsten
Wy kinne ien-stop tsjinst leverje:
1. PCB circuit boards.
2. E-test.
3.Electronic komponinten oankeap.
4. PCB gearkomste: beskikber op SMT, BGA, DIP.
5. PCBA funksje test.
6. Enclosure gearkomste.
PCB produkt Kapasiteit
| PCB Manufacture Kapasiteit | |
| Ûnderdiel | Spesifikaasje |
| Materiaal | FR-4, FR1, FR2;CEM-1, CEM-3, Rogers, Teflon, Arlon, aluminiumbasis, koperbasis, keramyk, servies, ensfh. |
| Opmerkingen | Hege Tg CCL is beskikber (Tg>=170 ℃) |
| Finish Board Dikte | 0,2 mm-6,00 mm (8mil-126mil) |
| Oerflakte ôfwurking | Gouden finger (>=0.13um), Immersion Gold (0.025-0075um), Plating Gold (0.025-3.0um), HASL (5-20um), OSP (0.2-0.5um) |
| Foarm | Routing, Punch, V-cut, Chamfer |
| Surface behanneling | Soldermasker (swart, grien, wyt, read, blau, dikte>=12um, Blok, BGA) |
| Silkscreen (swart, giel, wyt) | |
| Peelable-masker (read, blau, dikte>=300um) | |
| Minimum Core | 0.075 mm (3 mil) |
| Koper dikte | 1/2 oz min;12oz max |
| Min Trace Width & Line Spacing | 0.075mm/0.075mm (3mil/3mil) |
| Min Hole Diameter foar CNC Drilling | 0,1 mm (4 mil) |
| Min Hole Diameter foar Punching | 0,6 mm (35 mil) |
| Grutste paniel grutte | 610mm * 508mm |
| Hole Posysje | +/- 0,075 mm (3mil) CNC Boarjen |
| Dirigint Breedte (W) | +/- 0,05 mm (2 mil) of +/- 20% fan it orizjineel |
| Gatdiameter (H) | PTHL: +/- 0,075 mm (3 mil) |
| Non PTHL: +/- 0,05 mm (2 mil) | |
| Outline Tolerânsje | +/-0.1mm (4mil) CNC Routing |
| Warp & Twist | 0.70% |
| Isolaasje Resistance | 10 Kohm-20 Mohm |
| Conductivity | <50 ohm |
| Test Voltage | 10-300V |
| Panel Grutte | 110 x 100 mm (min) |
| 660 x 600 mm (max) | |
| Laach-laach misrepresentaasje | 4 lagen: 0,15 mm (6 mil) max |
| 6 lagen: 0,25 mm (10 mil) max | |
| Min ôfstân tusken gat râne nei circuit patroan fan in binnenste laach | 0,25 mm (10 mil) |
| Min ôfstân tusken board omtrek nei circuit patroan fan in binnenste laach | 0,25 mm (10 mil) |
| Board dikte tolerânsje | 4 lagen: +/- 0,13 mm (5 mil) |
